/
FIND THE PRODUCT YOU NEED
You can also call directly to consult us, consultation telephone：+86 15542656399
搜索
Production
All categories
Recommended News
Vacuum injection integrated machine
CONRAST OF WASTE MATERIALS
The slide plate will keep at constant temperature range of 60°C ~ 80°C, therefore it can avoid rubber materials being wasted in the mold and injector head.
CONTRAST OF MOLD
Only simple modification needed to make on regular injection mold, and make a new plate for pressing to achieve the best result.
CONTRAST OF MOLD INSTALLATION
Regular injection mold can directly used on Cold Runner Rubber Injection Machine, no need to install extra cooling pipe.
CONTRAST OF PRODUCING PRODUCTS
Every rubber products made by regular rubber an be produced on cold runner rubber injection machine.
CONTRAST OF SAVING MATERIALS
The more canal/channels/runners your mold has, the more rubber materials you can save (about saving 30-100cc/sheet).
The slide plate will keep at constant temperature range of 60°C ~ 80°C, therefore it can avoid rubber materials being wasted in the mold and injector head.
CONTRAST OF MOLD
Only simple modification needed to make on regular injection mold, and make a new plate for pressing to achieve the best result.
CONTRAST OF MOLD INSTALLATION
Regular injection mold can directly used on Cold Runner Rubber Injection Machine, no need to install extra cooling pipe.
CONTRAST OF PRODUCING PRODUCTS
Every rubber products made by regular rubber an be produced on cold runner rubber injection machine.
CONTRAST OF SAVING MATERIALS
The more canal/channels/runners your mold has, the more rubber materials you can save (about saving 30-100cc/sheet).
ENG INEERING RUBBER THERMOF ORMING MACHINE
FEATURES
♦High production capability.
♦Low noise level, stable machine.
♦High quality venti lation system.
♦Multiple compression levels.
♦Release bubbles system.
OIL PRESSURESYSTEM
♦The inported high-low compressive pump.
♦With group oil passage, it's simple to maintain, it's body & base as a complete unit could keep oil from leaking with GSPT adapting tube of steel pipe could keep oil from keading.
ELECTRONICSCONTROL SYSTEM
♦ HMI & PLC control system.
♦With the protection of air leaking & opencircuit devices.
♦The heating plates could keep operation safe.
♦Material feed compression, return, strippingcould be done automatically one time.
♦High production capability.
♦Low noise level, stable machine.
♦High quality venti lation system.
♦Multiple compression levels.
♦Release bubbles system.
OIL PRESSURESYSTEM
♦The inported high-low compressive pump.
♦With group oil passage, it's simple to maintain, it's body & base as a complete unit could keep oil from leaking with GSPT adapting tube of steel pipe could keep oil from keading.
ELECTRONICSCONTROL SYSTEM
♦ HMI & PLC control system.
♦With the protection of air leaking & opencircuit devices.
♦The heating plates could keep operation safe.
♦Material feed compression, return, strippingcould be done automatically one time.
HOT PRESS MOLDING MACHINE
FEATURES ♦High production capability.
♦Low noise level, stable machine. ♦High quality venti lation system.
♦Multiple compression levels.
♦Release bubbles system. OIL PRESSURESYSTEM ♦The inported high-low compressive pump. ♦With group oil passage, it's simple to maintain, it's body & base as a complete unit could keep oil from leaking with GSPT adapting tube of steel pipe could keep oil from keading. ELECTRONICSCONTROL SYSTEM ♦ HMI & PLC control system.
♦With the protection of air leaking & opencircuit devices. ♦The heating plates could keep operation safe. ♦Material feed compression, return, strippingcould be done automatically one time.
♦Low noise level, stable machine. ♦High quality venti lation system.
♦Multiple compression levels.
♦Release bubbles system. OIL PRESSURESYSTEM ♦The inported high-low compressive pump. ♦With group oil passage, it's simple to maintain, it's body & base as a complete unit could keep oil from leaking with GSPT adapting tube of steel pipe could keep oil from keading. ELECTRONICSCONTROL SYSTEM ♦ HMI & PLC control system.
♦With the protection of air leaking & opencircuit devices. ♦The heating plates could keep operation safe. ♦Material feed compression, return, strippingcould be done automatically one time.
VACUUM MOLDING MACHINE
MOLD CALIBRATION ♦Available with slow mod calibration. HEATING SYSTEM ♦Uses SSR with fast heat-up without exceeding the limit.
VACUUM SYSTEM ♦Utilizes upward pull motion for hydraulic cylinder in the vacuum hood, which supports to provide stability and prevent oil leakage. IN / OUT MOLDS & EJECTOR ♦Designed with special isolating devices to prevent wearing of the heat plate and the in / out-mold plate. HYDRAULIC CIRCUIT DESIGN ♦Fully proportional hydraulic system is designed for easily adjustable pressure and speed.
VACUUM SYSTEM ♦Utilizes upward pull motion for hydraulic cylinder in the vacuum hood, which supports to provide stability and prevent oil leakage. IN / OUT MOLDS & EJECTOR ♦Designed with special isolating devices to prevent wearing of the heat plate and the in / out-mold plate. HYDRAULIC CIRCUIT DESIGN ♦Fully proportional hydraulic system is designed for easily adjustable pressure and speed.
INJECTION MOLDING MACHINE / HORIZONTAL
FEATURE ♦Low pressure for mold protection.
♦Multi-stages control up-down.
♦Pressure stable, accurate, quiet.
♦Temperature accurately, Exhaust accurately, low noise.
♦Various function, HMI / PLC controlled. INJECTION SYSTEM ♦Multi-step pressure, speed and injection volume control.
♦Digital injection volume control system design.
♦Injection head has a spiral-circuit temperature control. MATERIAL FEEDING SYSTEM ♦A material anti-reversing device is equipped. CONTROL UNIT ♦Fully functional flow control display.
♦User-friendly software programming. ♦Multi sets of molding daya memories.
♦Whole-unit breakdown detecting function.
♦Multi-stages control up-down.
♦Pressure stable, accurate, quiet.
♦Temperature accurately, Exhaust accurately, low noise.
♦Various function, HMI / PLC controlled. INJECTION SYSTEM ♦Multi-step pressure, speed and injection volume control.
♦Digital injection volume control system design.
♦Injection head has a spiral-circuit temperature control. MATERIAL FEEDING SYSTEM ♦A material anti-reversing device is equipped. CONTROL UNIT ♦Fully functional flow control display.
♦User-friendly software programming. ♦Multi sets of molding daya memories.
♦Whole-unit breakdown detecting function.
INJECTION MOLDING MACHINE / VERTICAL
FEATURE ♦ Prevent dead material remaining. ♦Easy to replace different material & not wasteful. ♦Applicable to all kinds of rubber materials. MOLD CALIBRATION ♦Available with slow mod calibration. HEATING SYSTEM ♦Uses SSR with fast heat-up without exceeding the limit. IN-OUT ♦Designed with special isolating devices to prevent wearing of the heat plate and the in / out - mold plate. HYDRAULIC CIRCUIT DESIGN ♦Fully proportional hydraulic system is designed for easily adjustable pressure and speed.
COLD RUNNER MOLDING MACHINE
CONRAST OF WASTE MATERIALS
The slide plate will keep at constant temperature range of 60°C ~ 80°C, therefore it can avoid rubber materials being wasted in the mold and injector head.
CONTRAST OF MOLD
Only simple modification needed to make on regular injection mold, and make a new plate for pressing to achieve the best result.
CONTRAST OF MOLD INSTALLATION
Regular injection mold can directly used on Cold Runner Rubber Injection Machine, no need to install extra cooling pipe.
CONTRAST OF PRODUCING PRODUCTS
Every rubber products made by regular rubber an be produced on cold runner rubber injection machine.
CONTRAST OF SAVING MATERIALS
The more canal/channels/runners your mold has, the more rubber materials you can save (about saving 30-100cc/sheet).
The slide plate will keep at constant temperature range of 60°C ~ 80°C, therefore it can avoid rubber materials being wasted in the mold and injector head.
CONTRAST OF MOLD
Only simple modification needed to make on regular injection mold, and make a new plate for pressing to achieve the best result.
CONTRAST OF MOLD INSTALLATION
Regular injection mold can directly used on Cold Runner Rubber Injection Machine, no need to install extra cooling pipe.
CONTRAST OF PRODUCING PRODUCTS
Every rubber products made by regular rubber an be produced on cold runner rubber injection machine.
CONTRAST OF SAVING MATERIALS
The more canal/channels/runners your mold has, the more rubber materials you can save (about saving 30-100cc/sheet).
上一个
1
下一个
CONTACT
Tel：+86 15542656399
Add：Xinhua Industrial Park, Zhuanghe city, Dalian, Liaoning Province
Email：sales@tungshin.cn
MESSAGES
客户留言
Description:
Copyright: Dalian Huahan Intelligent Equipment Co., Ltd. All Rights Reserved 辽ICP备18015730号-1 Powered by www.300.cn
Tel：+86 15542656399 
Email：sales@tungshin.cn 